Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 871

SETTING MODE►SYSTEM SETTINGS Internet Fax Settings Settings related to the image send function (Internet fax, Direct SMTP, etc.) can be configured. Condition Settings Configures the default settings for Internet fax. Resolution Setting Apply the Resolution Set when Stored You can apply the resolution setting that was set when the file was saved to transmission of the file. Factory default settings: Disable Resolution Set the resolution used for file transmission. Factory default settings: 200×100dpi Half Tone Enable half-tones. Factory default settings: Disable Initial File Format Setting File Format This is used to set the file type for Internet fax transmission. The following settings can be configured. • TIFF-S • TIFF-F If one of the following functions is set, the image will be sent in TIFF-F format even if TIFF-S is set. • Mixed Size Orig. • Dual Page Scan • Book Divide • Card shot • 2in1 Compression Mode This is used to set the compression mode for Internet fax transmission. The following settings can be configured. • MH (G3) • MMR (G4) Factory default settings: File Type:TIFF, Compression Mode:MH (G3) [MMR (G4)] cannot be selected when [File Type] is set to [TIFF-S]. Auto Wake Up Print When the [Power] button is "Off" (but the main power switch is "On") and an Internet fax is received, this function activates the machine and prints the fax. When this function is disabled, received Internet faxes are not printed until the ([Power] button) is switched "On". Factory default settings: Enable 9-97