Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 18

BEFORE USING THE MACHINE►LOADING PAPER TRAY 1 - 4 (when a stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) A maximum of 550 sheets of paper from size 5-1/2" x 8-1/2"R to 12" x 18" (A6R to SRA3) can be loaded into trays 1. A maximum of 550 sheets of paper from size 5-1/2" x 8-1/2"R to 12" x 18" (A5 to SRA3) can be loaded into trays 2 to 4. Envelopes can be loaded up to 50 sheets or the height of the indicator line, or up to 200 sheets for 28 lbs. bond to 80 lbs. cover (106 g/m2 to 220 g/m2) heavy paper and up to 100 sheets for 80 lbs. cover to 110 lbs. cover (221 g/m2 to 300 g/m2) heavy paper in Tray 1. • If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "Settings (administrator)". Incorrect setting affects automatic paper selection action. It may cause print failure, printing on paper of a wrong size or type or paper misfeeds. • Depending on the countries or regions, envelopes may not be available. Do not place heavy objects on the tray or press down on the tray. 1 Pull out the paper tray. Gently pull the tray out until it stops. To load paper, go to step 3. To load a different size of paper, go to the next step. Pull the handle until the lock is released. 2 3 Adjust guide plates A and B to match the longitudinal and transversal dimensions of the paper to be loaded. The guide plates A and B are slidable. Squeeze the separator plate lever and slide to the desired paper size. Adjust to the non-standard paper size so that the paper will not be too loose or too tight. Fan the paper. Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed. 1-15