Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 446

FACSIMILE►BASIC TRANSMISSION METHODS SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES When scanning a non-standard size original such as a postcard, specify the original size by numeric values after placing the original. The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm). When the scan size is specified by numeric values, the send size cannot be specified. In Easy mode 1 Tap the [Original] key. 2 Original Size Image Orientation Auto Tap the [Auto] key. OK Duplex Setup 1-Sided Book Tablet 3 Tap the [Direct Entry] key. 4 Direct Entry Specify the original size. OK Y 11 (1 ~ 11 5/8) inch X 17 (1 ~ 17) inch • Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys. • It is convenient to use ( ) to finely adjust the entered size. 5 Tap twice. On the base screen, check that the specified size is displayed on the [Original] key. To cancel the specified size settings: Tap the [Auto] key. 5-46