Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 877
Server Settings
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 877 highlights
SETTING MODE►SYSTEM SETTINGS Allow/Reject Mail or Domain Name Setting Allows or refuses a reception from specified addresses/domains. Item Description Item Reception from the stored address/domain is not allowed. Allow Reception Reception from the stored address/domain is allowed. All Invalid All Invalid Add New Adds a new address or domain (maximum of 50) from which reception is to be rejected or allowed. Enter the address/domain (maximum of 64 characters) and tap the [Store] key. If the first character of the entry is not "@", the entry is identified as an address. If the first character is "@", the entry is identified as a domain. ([email protected].□□□ is treated as an address, and @xx.xxx.□□□ is treated as a domain. ) Storing an address specifies only that address. Storing a domain specifies all addresses that include that domain. Registered address or domain list Displays a list of the stored addresses and domains. An address or domain can be deleted from the list when selected. Factory default settings: All Invalid When there are no stored anti junk mail addresses or domains, only the [Add New] key can be selected. Server Settings Receive Settings Internet fax reception Set whether or not Internet Fax reception is performed. Factory default settings: Enable POP3 Server Enter the POP3 server name to use. Port Number Specify the port number of the POP3 server to be used. Factory default settings: 110 POP Authentication Set to use POP authentication. Factory default settings: Disable User Name Enter a maximum of 64 characters for the user name used to access the server. Password Enter a maximum of 32 characters for the password used to access the server. POP3 Communication Timeout Set a timeout for communication to the POP3 server. Factory default settings: 60sec. Reception Check Interval Setting Enter an acknowledge cycle to the POP3 server. Factory default settings: 0 hours 0 minutes 9-103