Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 48

BEFORE USING THE MACHINE►PERIPHERAL DEVICES FINISHER (LARGE STACKER) This device outputs sorted paper while staggering each set of paper. As needed, it staples each set. You can also perform stapling manually. To punch holes in printed paper, install an optional hole punch module. PART NAMES (1) (2) (3) (4) (5) (6) (1) Output tray (upper tray) The tray is slidable. To print on large paper such as 11" x 17" (A3) paper, extend the tray. (2) Output tray (lower tray) Stapled and offset output is delivered to this tray. The tray is slidable. To print on large paper such as 11" x 17" (A3) paper, extend the tray. (3) Manual staple key Press to execute manual stapling. (4) Top cover Open this cover to remove a paper misfeed. (5) Insertion slot Place the paper that you want to staple in this slot. Maximum thickness 23/64" (9 mm). (6) Front cover Open this cover to replace the staple cartridge, remove a staple jam or remove a paper misfeed. • To install a finisher (large stacker), a paper pass unit or folding unit and stand/550/2x550/3x550/550&2100 sheet paper drawer are required. • A finisher (large stacker) cannot be installed simultaneously with an inner finisher, finisher, saddle stitch finisher or saddle stitch finisher (large stacker). • Do not place heavy objects on the finisher (large stacker) or press down on the finisher (large stacker). • Exercise caution when you turn on the power and when printing take place, as the tray may move up and down. 1-45