Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 171

COPIER►BASIC PROCEDURE FOR MAKING COPIES MANUAL RATIO SELECTION This section explains how to specify any ratio when making a copy on paper that has a size different from the original or changing the image size for copying. The following three methods can be used to specify the ratio. Specifying the desired zoom ratio You can adjust the zoom ratio in 1% increments using or the 10 key to specify the desired zoom ratio. You can also select the enlargement or reduction ratio between commonly used fixed sizes from the preset ratio keys. Up to two ratio values can be added to preset ratio keys, respectively for enlargement and reduction. Specifying the paper size Specify the paper sizes of the original and output to automatically obtain the appropriate ratio. For example, when you select 11" x 17" (A3) as the original size and 8-1/2" x 11" (A4) as the paper size, the ratio is automatically set to 64% (70%). Original size: 11" x 17" Copy size: 8-1/2" × 11" 64% Specifying the image dimensions Specify the image sizes of the original and output to automatically obtain the appropriate ratio. To make a copy with the same ratio between the vertical and horizontal sizes, enter either one of the vertical and horizontal sizes. For example, when you enter 90mm as the source size and 135mm as the output size, the aspect ratio will be automatically set to 150%. Image size: 90mm Output size: 135mm 150% When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both between 25% to 200%. To return the ratio to 100%: Tap the [100%] key. 3-23