Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 278

COPIER►OTHER FUNCTIONS ADJUSTING THE COLOR (COLOR BALANCE) You can adjust the color, tone, and density of copies. Use the [Color] tab for color copy settings, or the [B/W] tab for black & white copy settings. If you select the [Color] tab, the densities of the colors yellow, magenta, cyan, and black are divided into three ranges, and you can adjust the density of each range. If needed, you can also adjust all three density ranges at once. C Cyan+ M Magenta+ Y Yellow+ Bk Black+ • Color Balance cannot be selected in easy mode. • Color Balance must be specified before scanning the original. 1 Tap the [Others] key, and tap the [Color Balance] key. 2 Tap the tab of the mode you want to adjust. 3 Color Balance Adjust Color Tone for Copy. Color Y M L MH L MH Cancel All C L MH B/W Bk L MH OK Set in a Batch Set in a Group by Color Reset Tap the key or slide the slider to adjust the color balance. • If you want to adjust each color individually on the [Color] tab, set the [Set in a Batch] checkmark to . • If you want to further adjust each range of each color individually, set the [Set in a Group by Color] checkbox to . • To adjust each range on the [B/W] tab, set the [Set in a Batch] checkbox to . • To adjust a slider individually with the keys, tap the slider you want to adjust and tap the keys. • After the settings are completed, tap [OK] key. To return the color balance of the current tab to the default balance: Tap the [Reset] key. The values of all gradations currently being adjusted will return to their default color balance values. 3-130