Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 926

SETTING MODE►SYSTEM SETTINGS Powering Off Sound Control the machine power off notification sound level, or turns the sound off. Factory default settings: Middle Caution Sound Settings Set whether to play a notification sound when the machine is in the following status. Paper Empty, No Original, Jam, Toner Empty (Black), Toner Empty (Color), Waste Toner Full, Output Tray Full, Stapler Empty, Maximum Number of Sheets that can be Stapled is Reached Factory default settings: Warning Beep:Medium, Paper Empty:Enable, Invalid except Paper Empty Beep Sound Settings (Image Send) Adjust the sound volume of functions used in fax and scan operations. You can check the setting sound in the setting mode of this unit. Fax Set the sound for the Speaker, Ringer Volume, Line Monitor, Fax Receive Complete Signal, Fax Send Complete Signal, and Fax Communication Error Signal. Factory default settings: Speaker:Speaker Volume Setting:5, Ringer Volume:Speaker Volume Setting:3, Line Monitor:Speaker Volume Setting:None, Fax Receive Complete Signal:Speaker Volume Setting:3, Tone Pattern:Pattern 3, Transmission Complete Sound Time Setting:3.0sec, Fax Send Complete Signal:Speaker Volume Setting:3, Tone Pattern:Pattern 3, Transmission Complete Sound Time Setting:3.0sec Fax Communication Error Signal:Speaker Volume Setting:3, Tone Pattern:Pattern 3, Transmission Complete Sound Time Setting:Every 0.3 seconds Internet Fax Adjust the Fax Communication Error Signal and Fax Receive Complete Signal speaker volume setting. Factory default settings: Communication Error Signal:Middle, Fax Receive Complete Signal:Middle 9-152