Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 645

SCANNER/ INTERNET FAX►OTHER FUNCTIONS 4 Tap the [Others] key, and tap the [Blank Page Skip] key. 5 Blank Page Skip OK Off Skip Blank Page Skip Blank and Back Shadow Tap the [Skip Blank Page] or [Skip Blank and Back Shadow] key. After the settings are completed, tap sequence. and [Back] keys in To cancel the Blank Page Skip setting: Tap the [Off] key. 6 Tap the [Start] key to start scanning of the original. A beep will sound to indicate that scanning has ended. Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED (page 6-93)". 7 (C) (A) (B) 5 sheets of original (P.10) have been scanned. Send 8 pages of the original. Execute the job? Cancel OK When scanning ends, check the number of original sheets and the number of sheets to be sent and tap the [OK] key to start transmission. • When Job Build mode is used, the confirmation message will appear after the [Start] key is tapped. • On the confirmation screen, the number of scanned original sheets appears in (A), the number of scanned sides in (B), and the number of sheets to be sent excluding blank pages in (C). For example, if five original sheets that include two blank pages are scanned by duplex scanning, (A) will show "5", (B) will show "10", and (C) will show "8". If this step is not performed within one minute after the above confirmation screen appears, the scanned image and settings will be cleared and the base screen will reappear. Scanning will not be completed automatically and the image will not be reserved for transmission. 6-139