Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 426

FACSIMILE►BASIC TRANSMISSION METHODS WHEN THE LINE IS BUSY If the line is busy when you send a fax, transmission will be attempted again automatically after a preset interval. This function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the transmission will be canceled. Wait for a brief period and then try sending the fax again. To cancel transmission: Do so from the job status screen. STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS (page 2-52) To set the number of recall attempts and the interval between attempts when the connection cannot be established because the line is busy, or for other reasons: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Recall in Case of Line Busy]. When this setting is enabled, note that the machine will not attempt the call again when manual transmission or direct transmission is used. WHEN A COMMUNICATION ERROR OCCURS If a communication error occurs or the other fax machine does not answer the call within a preset period of time, transmission will automatically be attempted again after a preset interval. This function only operates in memory transmission mode. Faxes sent by direct transmission or manual transmission are not automatically resent. To cancel transmission: Do so from the job status screen. STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS (page 2-52) To set the number of recall attempts and the interval between attempts when a transmission fails due to an error: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Recall in Case of Communication Error]. 5-26