Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 276
Adjusting Red/green/blue In Copies Rgb Adjust
![]() |
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
COPIER►OTHER FUNCTIONS ADJUSTING RED/GREEN/BLUE IN COPIES (RGB ADJUST) This function heightens or lightens any one of the three color components R (red), G (green), and B (blue). R(Red)+ G(Green)+ B(Blue)+ • RGB cannot be selected in easy mode. • RGB must be specified before scanning the original. 1 Tap the [Others] key, and tap the [RGB Adjust] key. 2 Tap the key of the color you want to adjust. 3 RGB Adjust Any one color can be adjusted. This setting is only applied to color. Off R(Red) G(Green) B(Blue) Touch [+] to darken and [-] to lighten selected color tone. OK Tap or slide the slider to adjust the coloring. After the settings are completed, tap [OK] key. • Only one color can be adjusted. (If you adjust one color and then tap another color, the adjustment of the first color is canceled.) • To cancel the RGB adjust setting: Tap the [Off] key. 4 Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. AUTOMATIC DOCUMENT FEEDER (page 1-30) DOCUMENT GLASS (page 1-34) To cancel all settings: Tap the [CA] key. 5 Tap the [Color Start] key to start copying. 3-128
![](/manual_guide/products/sharp-bp50c26-color-advanced-essentials-bp-series-operating-manual-9e53f11/276.png)