Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 863

SETTING MODE►SYSTEM SETTINGS Display Fax Screen when External Telephone is Off-hook When an external phone is connected, the touch panel displays that the external phone is on-hook. Factory default settings: Enable Do not use this function when an external telephone is not connected. You may not be able to receive faxes properly. Transaction Report Print Select Setting Selects whether or not a transaction report will be printed, and if printed, the condition for being printed. Select a setting for each of the following operations: Single Sending • Print Out All Report • Print Out Error Report Only • No Printed Report Broadcasting • Print Out All Report • Print Out Error Report Only • No Printed Report Receiving • Print Out All Report • Print Out Error Report Only • No Printed Report Confidential Reception • Print Out All Report • No Printed Report When a transaction report is printed, this is used to print part of the first page of the transmitted original on the transaction report. For more information, see "Original Print on Transaction Report (page 9-98)". Factory default settings: Single Sending: Print Out Error Report Only, Broadcasting: Print Out All Report, Receiving: No Printed Report, Confidential Reception: Print Out All Report Even if a print setting is enabled for "Receiving", a transaction report will not be printed if you receive from a number that is rejected with the "F-Code Memory Box (page 9-95)". Activity Report Print Select Setting You can set the machine to periodically print the activity report that is stored in memory. The Image Sending Activity Report can be set to print each time the number of transactions reaches 200, or at a specified time (once a day only). (The settings can be simultaneously enabled.) Factory default settings: Auto Print at Memory Full: Disable, Print Daily at Designated Time: Disable • If you only select the "Print Daily at Designated Time" setting and the number of recorded transactions reaches 200 before the specified time, each new transaction will delete the oldest transaction (the oldest transaction will not be printed). • The Transaction Report can be printed out manually as needed. For more information, see "List for Administrator (page 9-30)". Super G3 Setting This setting is set when the destination does not correspond to Super G3. Factory default settings: Enable 9-89