Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 866

SETTING MODE►SYSTEM SETTINGS Receive Settings Settings for fax transmission can be configured. Number of Calls in Auto Reception This setting is used to select the number of rings on which the machine automatically receives a call and begins fax reception in auto reception mode. The "Number of Calls in Auto Reception" that can be set in each area are shown in the following table. Factory default settings: 2 Time(s) If you select "0" for the number of rings, the machine will immediately answer and begin fax reception without ringing in auto reception mode. Switching to Automatic Reception When there is an incoming fax in manual reception mode, it automatically switches to automatic reception. Also, set the number of times the ringer sounds before switching to automatic reception between 1 and 9 times. Factory default settings: 9 times 2-Sided Printing of Received Data This is used to have received faxes printed on both sides of the paper. When this setting is enabled and a fax consisting of 2 or more pages is received (the pages must be the same size), the pages are printed on both sides of the paper. Factory default settings: Disable Auto Receive Reduce Setting When a fax is received that includes printed information such as the sender's name and address, the received image is slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size. Factory default settings: Enable If Auto Receive Reduce is disabled, the edges of the image outside the standard size will be cut off. However, the image will be clearer because it will be printed at the same size as the original. Standard sizes are sizes such as 8-1/2" x 11" and 5-1/2" x 8-1/2" (A4 and B5). Print Style Setting This setting determines the paper selection condition when printing received faxes. Select one of the three conditions below. Print Actual Size Cut off Disabled The received fax image is printed at its actual size (without dividing it onto multiple sheets of paper). If the same size of paper or larger paper is not loaded, the fax will be received in memory and will not be printed until a suitable size of paper is loaded. However, if the received fax is longer than 11" x 17" (A3) size, it will be automatically divided onto multiple sheets of paper. Print Actual Size Cut off Enabled Each received image is printed at full size. If necessary, the image is divided onto multiple sheets of paper. Auto Size Select Each received image is printed at actual size when possible. When not possible, the image is automatically reduced before printing. Factory default settings: Auto Size Select 9-92