Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 874

SETTING MODE►SYSTEM SETTINGS Default Own Number Sending You can include the date and your sender information (sender name and address) at the top of the page when the receiving machine prints an image that you send. Factory default settings: Enable Printing Page Number at Receiver When the transmitted image is printed by the receiving machine, the page number can be added to the top of each printed page. Factory default settings: Enable Recall in Case of Line Busy (This setting is only effective for Direct SMTP transmission.) This setting sets the number of recall attempts and the interval between recall attempts when a transmission is not successful due to the line being busy or other reason. Number of Times to Recall When Line is Busy This setting specifies whether or not recalling is performed when the line is busy. During recalling, you can set the number of recall attempts. Any number from 0 to 15 can be selected. Factory default settings: 2 Time(s) Interval to Wait Between Recall Attempts (min.) When Line is Busy The interval between recall attempts can be set. Any number of minutes from 1 to 15 can be selected. Factory default settings: 3 Minute(s) Recall in Case of Communication Error (This setting is only effective for Direct SMTP transmission.) This determines how many times the machine will automatically attempt the call again if a fax transmission fails due to a communication error. Number of Times to Recall in Case of Error Specify how many times the machine will attempt the call again when a communication error occurs. During recalling, you can set the number of recall attempts. Any number from 0 to 15 can be selected. Factory default settings: 2 Time(s) Interval to Wait Between Recall Attempts (min.) in Case of Error The interval between recall attempts can be set. Any number of minutes from 1 to 15 can be selected. Factory default settings: 3 Minute 9-100