Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 946

SETTING MODE►SYSTEM SETTINGS Access Point Search Click this to search access points. When the search results are displayed, select the access point to use and click [OK]. [SSID], [Security Type], and [Encry.] are automatically applied. Name Enter the name of the connection destination. SSID Enter the SSID. Security Type Select a security type. Factory default settings: WPA2 Personal Encry. Select an encryption type. Factory default settings: AES Security Key Enter a security key. Security Type Security Key • WEP • WPA/WPA2-mixed Personal • WPA2 Personal • WPA2/WPA3-mixed Personal • WPA3 Personal • WPA2/WPA3-mixed Enterprise • WPA3 Enterprise WEP64bit: WEP64bit: 5 characters or 10-digit hexadecimal number WEP128bit: 13 characters or 26-digit hexadecimal number WPA/WPA2/WPA3: 8 to 63 characters or 64-digit hexadecimal number Show Security Key When enabled, the security key will be displayed. Factory default settings: Disable Bluetooth Setting Set when connecting this unit to a mobile device using Bluetooth. Bluetooth You can use the Bluetooth function with this unit. Factory default settings: Disable Device Web Page Setting The following explains the access settings to Setting mode (Web version). HTTP Access Settings Number of Users who can log in at the Same Time Enter a number of users who can access Setting mode (Web version) simultaneously. Factory default settings: 32 Auto Logout Time Enter a time to automatically log out when no communication continues with the machine. Factory default settings: 60 minutes When settings are changed, the changes will take effect after the machine is restarted. For details on restarting this machine, see "TURNING ON THE POWER (page 1-10)". 9-172