Sharp BP-70C45 Color Advanced and Essentials BP Series Operating Manual - Page 404

FACSIMILE►BEFORE USING THE MACHINE AS A FAX 2 Make sure the main power switch is in the " " position. When the main power indicator is lit up, the main power is in the " " position. If the main power indicator is not lit up, turn the main power switch to the " " position and press the [POWER] button on the operation panel. TURNING ON THE POWER (page 1-10) When "Settings (administrator)" → [System Settings] → [Image Send Settings] → [Fax Settings] → [Condition Settings] → [Auto Wake Up Print] is enabled, even if the power to the machine is turned off (the main power switch is on), when a fax is received, the machine will automatically turn on and output the received data. When [Auto Wake Up Print] is disabled and the [Power] button is unlit, the received data is stored in memory in the machine and will not be output until the power is turned on. If the fax function will be used, and in particular if reception or timer transmission will take place at night, do not turn the main power off. 3 Setting the telephone line type. The machine's dial mode setting must be set to match the type of telephone line you are using. * If the setting is incorrect, it may result in dialing failures or cause calls to be made to the wrong destination. • If you want to set the type of telephone line automatically In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Dial Mode Setting], and tap the [Auto Select] key. • If necessary, you can set the type of telephone line manually. • When you connect to a digital line When Digital Line Network is enabled, the send level will be 15 dB or less when you connect to a digital line. In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Digital Line Network]. 4 Checking the date and time. Verify that the correct date and time are set in the machine. To set the date and time of the machine: In "Settings", select [System Settings] → [Common Settings] → [Device Control] → [Clock Adjust]. 5 Storing the sender fax number. Store a sender name in [Sender Name] and a fax number in [Fax No.]. Be sure to configure this information, as it is required for communication. To store the sender's name and address: In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Common Settings] → [Own Number and Name Set] → [Sender Data Registration]. 5-4