HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide - Supporting Fab - Page 201

Setting up iSCSI Target Gateway Services 14 To edit the IP route 1. Open iSCSI Target Gateway Admin as described on page 175. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port that will be used. 4. Select the IP Routes tab. 5. Click Edit. A warning dialog box appears. 6. Click OK. 7. Enter a new value for the metric. 8. Click OK. If you want to change a value other than the metric, you will need to delete this route and create another in its place. MANAGING THE ISCSI VIRTUAL TARGETS iSCSI virtual target creation is the first pane in the iSCSI Target Gateway Admin module. The iSCSI Virtual Target wizard provides two ways to create iSCSI targets: Create and Easy Create. Both procedures are simple to use, but Create allows you to double check your work several times before committing the changes. You can edit a virtual target even when there is an active iSCSI session. To create iSCSI virtual targets 1. Open iSCSI Target Gateway Admin as described on page 175. 2. Select the Targets tab. 3. Click Create. The VT Configuration Wizard opens. FIGURE 81 VT Configuration Wizard Web Tools Administrator's Guide 179 Publication Number: 53-1000435-01