HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide - Supporting Fab - Page 239

Managing RADIUS service 17 MODIFYING THE RADIUS SERVER ORDER The RADIUS servers are contacted in the order they are listed, starting from the top of the list and moving to the bottom. To modify the order in which the RADIUS servers are contacted 1. Open the Switch Administration window as described on page 31. 2. Click the AAA Service tab. 3. Click a RADIUS server from the RADIUS Configuration list. 4. Click the up and down arrows to rearrange the order of the RADIUS servers. 5. Click Apply. REMOVING A RADIUS SERVER Use the following procedure to remove a RADIUS server. To remove a RADIUS server 1. Open the Switch Administration window as described on page 31. 2. Click the AAA Service tab. 3. Click a RADIUS server from the RADIUS Configuration list. 4. Click Remove. If there is no RADIUS server configured, the Remove button is disabled. You cannot remove the only RADIUS server if the RADIUS service is the primary AAA service. The RADIUS server is not deleted until you apply the changes from the AAA Services tab. 5. Click Apply in the AAA Services tab. A confirmation displays, warning you that you are about to remove the selected RADIUS server. 6. Click Yes in the confirmation. Web Tools Administrator's Guide 217 Publication Number: 53-1000435-01