Brother International PE-DESIGN 10 Instruction Manual - Page 149

Advanced Stitch Wizard Operations Creating Embroidery Patterns Using Images c If [Auto Generate] was clicked, an outline of mask was automatically detected from the image. The [Auto Generate] button is available only with images that have a light-colored background, like in this photo. a A mask shape edited with or created by clicking [Auto Generate] will be added at the top of the list. Then, this mask shape can be selected the next time a pattern is created using a Stitch Wizard. A maximum of five shapes will be added, and they will be arranged in order of the most recently used. These mask shapes appear no matter which Image To Stitch function is selected. d Zoom e Clicking the [Image Tune] button displays an [Image Tune] dialog box. • Move the [Original] - [Sharp] slider to adjust the sharpness of the image's outlines. A setting more towards [Sharp] makes a more noticeable boundary between bright and dark areas. • Move the [Dark] - [Bright] slider to adjust the brightness of the image. • Move the [Low] - [High Contrast] slider to adjust the contrast of the image. f Clicking [Open Image] allows you replace the image with a different one. The [Open an image file] dialog box appears. Select a file. The next step differs depending on the color range selected for the embroidery pattern. ■ Check Mask Shape/Modify Image dialog box If Color, Sepia or Gray was selected for [Photo Stitch 1], [Photo Stitch 2] or Cross Stitch, or if [Auto Punch] was selected: The following dialog box appears. a b c d a Adjust the position and size of the image. Drag the image to the desired position. Drag the handle to adjust the image to the desired size. b Click [Design Settings] to change the size of the Design Page. Specify the settings in the [Design Settings] dialog box. cc "Specifying the Design Page Settings" on page 14 c Click [Fit to page] to adjust the image to the size of the Design Page. d Embroidery pattern size 148