Brother International PE-DESIGN 10 Instruction Manual - Page 88

Checking Embroidery Patterns Jump Stitch Trimming The Jump Stitch Trimming function can be turned on or off. a These settings are applied only when embroidering with our multi-needle embroidery machines. Before these settings can be specified, select under [Machine Type] in the [Design Settings] dialog box. cc "Specifying the Design Page Settings" on page 14 The Jump Stitch Trimming button ( ) is available in the [Sewing Order] pane. b • appears if the thread trimming setting is not the same for all patterns in a frame with beside it. • The thread is cut before the thread color is changed, even if [Jump Stitch Trimming] has been turned off for the frame. • Click the [View] tab, and then select the [View Thread Trimming] check box in the [View Mode] group. To view the thread trimming locations in the Design Page. Select a frame, and then click . ON OFF About Minimum jump stitch length for thread trimming • The jump stitch length can be specified on the [Output] tab into the [Design Settings] dialog box. (To displayed it, click Settings]). , then [Design • If the jump stitch length is less than the length specified for [Minimum jump stitch length for thread trimming], the thread will not be cut, even if [Jump Stitch Trimming] has been set. • Whether or not [Minimum jump stitch length for thread trimming] is available differs depending on the selected machine model. For details, refer to the Operation Manual for the machine. 87