Brother International PE-DESIGN 10 Instruction Manual - Page 184
Tutorial 9-2: Creating Design for Multi- Position Hoops
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Tutorial 9-2: Creating Design for Multi-Position Hoops Tutorial 9-2: Creating Design for MultiPosition Hoops This program enables you to create multi-position designs that you can stitch in any multi-position hoop attached to your embroidery machine. a a b b c c ABC Example of multi-position hoop: 100 × 172 mm hoop Although the size of the design that can be embroidered using an multi-position hoop is 130 × 180 mm (or 100 × 100 mm, depending on the sewing area of the embroidery machine), first determine which of the three installation positions (indicated as a, b, and c in the illustration above) the multi-position hoop will be installed at and determine the orientation of the design. When creating the design, each design section can only be as large as the sewing area of the embroidery machine. The sample file for this tutorial is located at Documents (My documents)\PE-DESIGN 10\Tutorial\Tutorial_9. Step 1 Step 2 Step 3 Step 4 Selecting the Design Page size Creating the design Optimizing hoop changes Checking the pattern Step 1 Selecting the Design Page size 1 Click , then [Design Settings]. 2 Select under [Machine Type], and then select [Hoop Size] and choose a Design Page size of 130 × 300 mm or 100 × 172 mm from the selector. Then, click [OK]. 183