Brother International PE-DESIGN 10 Instruction Manual - Page 173
Spacing], 3.0 mm], Direction], Covering Satin Stitch], Width], Density], 6.5 line/mm], Cutwork Wizard]
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Tutorial 8-3: Creating a Cutwork Pattern Filled with Net Stitching 9 Specify the pattern spacing for the net fill stitch in [Spacing]. For this example, set it to [3.0 mm]. 13 Specify the density of the satin stitching in [Density]. For this example, set it to [6.5 line/mm]. 2.0 mm 10.0 mm 10 Specify the pattern direction of the net fill stitch in [Direction]. For this example, set it to [0°]. 5.0 line/mm 7.0 line/mm 14 Click [OK] to exit the [Cutwork Wizard]. 0° 90° 11 Specify satin stitching after cutting in [Covering Satin Stitch]. Satin stitching is sewn along the edges of inner cutouts. The zigzag stitch or the stem stitch is used as an underlay for the satin stitching. For this example, select [Yes]. Operations for Specific Applications Select the parameters according to the procedure from step 12 to 13, when [Covering Satin Stitch] is set to [Yes]. 12 Specify the width of the satin stitching in [Width]. For this example, set it to [4.0 mm]. 3.0 mm 6.0 mm 172