Brother International PE-DESIGN 10 Instruction Manual - Page 297

Sewing Wide Areas • For best sewing results, set [Under sewing] to [On] when sewing wide regions. cc For more details, refer to "Under sewing" on page 331. • Changing the [Sewing Direction] setting prevents pulling-in or puckering of the stitching. • When embroidering, use stabilizer material specifically for embroidering. Always use stabilizer material when embroidering lightweight or stretch fabrics, otherwise the needle may bend or break, the stitching may pull and pucker, or the pattern may become misaligned. • When satin stitching is sewn in a wide area, the stitched area may shrink after sewing, depending on the material and the type of thread used. If this happens, switch to this alternate method: Select the fill stitch and use stabilizer material on the reverse side of the fabric. Pattern For Basic Operations Supplement After sewing 296