Brother International PE-DESIGN 10 Instruction Manual - Page 164
Satin Stitch, Output Pattern]
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Tutorial 8-1: Creating Appliqués 6 Specify the stitching for securing the appliqué in [Covering Stitch]. Select the sew type and other attributes ([Width] and [Density]) for finishing the appliqué. For this example, select "Satin Stitch", and then set [Width] to "3.0 mm" and [Density] to "5.0 line/mm". Satin Stitch Settings can be specified for [Width] and [Density]. 7 Under [Output Pattern], select whether covering stitches will be added around the entire pattern ([Add]) or covering stitches will be sewn for shape lines ([Replace]). For this example, select [Replace]. Add Settings can be specified for [Distance from original Pattern]. E Stitch Settings can be specified for [Stroke], [Interval] and [Pitch]. V Stitch Settings can be specified for [Stroke], [Interval] and [Pitch]. Replace 8 Specify hole sewing in [Create an applique with hole sewing]. cc For details on setting [Stroke], [Interval] and [Pitch], refer to"E/V Stitch" on page 328 Select this check box when creating an appliqué with holes (empty regions). For this example, select this check box. b This check box appears when only the outer pattern with hole sewing applied or only a text pattern (with fonts other than built-in fonts 025 and 029, a user-defined font or a Small Text font) is selected, or when [Replace] is selected under [Output Pattern]. * Multiple text patterns can be selected if certain conditions are met. 163