Brother International PE-DESIGN 10 Instruction Manual - Page 298

On Settings On Settings Jump Stitch and Jump Stitch Trimming ■ Machine thread trimming according to settings specified in Layout & Editing If is selected in the [Design Settings] dialog box of Layout & Editing, trimming can be turned on or off at each jump stitch location. These settings are saved in embroidery data files (.pes). If you are using our multi-needle embroidery machine with the Jump Stitch Trimming function turned on to embroider this imported .pes file, the machine will trim the thread according to the PES data settings. a For details on the jump stitch trimming function of the machine, refer to the Operation Manual provided with your embroidery machine. ■ Specifying trimming settings in Layout & Editing 1 Select box. in the [Design Settings] dialog cc "Specifying the Design Page Settings" on page 14 2 Display the trimming locations in Layout & Editing. cc Memo of "Changing the display of the embroidery design" on page 78 3 Turn on/off jump stitch trimming for each embroidery pattern. cc "Jump Stitch Trimming" on page 87 If necessary, change settings for the following. • Automatically turning off trimming when the jump stitch length is less than that specified. cc "Jump Stitch Trimming" on page 87 and "About Minimum jump stitch length for thread trimming" on page 87 • Default setting for turning on/off jump stitch trimming when a new embroidery pattern is created. cc "Adding jump stitch trimming to new patterns" on page 302 Stitching Jump stitch Stitching a These settings are applied only when embroidering with our multi-needle embroidery machines. These settings are not applied with any other embroidery machine. 297