Brother International PE-DESIGN 10 Instruction Manual - Page 163

2 Specify settings in the [Applique Wizard] dialog box in the following order a - f. a b c d e Tutorial 8-1: Creating Appliqués Running Stitch Select this setting to sew the cutting line, then cut along the cutting line with scissors. f a Applique Material b Applique Position c Tack down d Covering Stitch e Output Pattern f Create an applique with hole sewing This check box appears when using a pattern with hole sewing applied and [Replace] is selected under [Output Pattern]. b To return all parameters to their default settings, click [Default]. 3 Specify cutting lines for the appliqué in [Applique Material]. The outline of the appliqué can be sewn as running stitches or the appliqué can be cut out, or it can be neither sewn nor cut out.  For this example, select [Yes] then [Cutting]. Cutting In order for this setting to be available cc "Basic requirements for Cutwork functions" on page 173 Select this setting to cut the fabric with a machine installed with cutwork needles. 4 [Applique Position] is specified automatically.  The guideline for attaching the appliqué piece is set to be sewn automatically. 5 Specify basting of the appliqué in [Tack down]. The appliqué piece can be basted onto the base fabric. Select one of three stitches.  For this example, select [Yes] then [V Stitch]. Satin Stitch E Stitch V Stitch Operations for Specific Applications 162