Brother International PE-DESIGN 10 Instruction Manual - Page 335
Programmable fill, Browse], Maintain aspect ratio, Direction, Offset, column, Base Sewing, Stitch Type
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Sewing Attributes Programmable fill 1 2 Maintain aspect ratio Direction row Click to display the [Browse] dialog box. Select a folder, and then select the desired pattern (.pas file) from the list of patterns that appears. Specify the pattern size. The pattern can be enlarged or reduced while maintaining the width-to-height proportion. Smaller Larger 1 Height (vertical length) Specify the pattern height. Short Tall 2 Width (horizontal length) Specify the pattern width. Short Long When selected, the height-to-width proportions of the pattern are maintained. 135° 90° 45° 180° 0° 225° 270° 315° 0% Offset column Row 50% Column 50% Menus/Tools and Reference Base Sewing Stitch Type Step pitch Frequency To specify base stitching, select the check box, and then specify settings for the following attributes. Specify the shape of the returning ends of the stitching. This cannot be specified if the sewing direction is set to [Auto]. Specify the length of one stitch. Short Long 0% 50% Pattern Area where the embossing or engraving effects are applied This area is sewn with the stitching settings specified for the base sewing of the programmable fill stitch. This area is sewn with the stitching settings specified by the pattern file. 334