Brother International PE-DESIGN 10 Instruction Manual - Page 178

Tutorial 9-1: Creating Split Embroidery Designs Tutorial 9-1: Creating Split Embroidery Designs Layout & Editing has a function for creating split embroidery designs when the embroidery pattern being created is larger than the embroidery hoop. The sample file for this tutorial is located at Documents (My documents)\PE-DESIGN 10\Tutorial\Tutorial_9. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Specifying the Design Page size in Layout & Editing Creating the embroidery design Checking the embroidering order Attaching stabilizer to the fabric Using the Positioning Sheet, mark the embroidering position on the fabric Hooping the fabric Embroidering Step 1 Specifying the Design Page size in Layout & Editing 1 Click , then [Design Settings]. b Select [Custom Size], and then type or select the desired width and height for the Design Page. This setting is to specify the exact width and height of a design. For this example, set width to 230 mm and height to 330 mm. c Click the [Section Size (for Hoop Size)] selector, and then select the size of the sections (your embroidery hoop). For this example, select 120 × 170 mm (130 × 180 mm). 2 Specify the Design Page size and the size of the design sections. b • With the [Section Size (for Hoop Size)] setting, the width and height of the sections are 10mm smaller than the actual hoop size in order to provide space for fine positioning adjustments with adjustment sections. The 10mm is for overlapping. • It is not necessary for the [Section Size (for Hoop Size)] to match the Design Page size. Select the hoop size to be used for sewing. 3 Click [OK]. a b c a Select the type of embroidery machine to be used. 177