Brother International PE-DESIGN 10 Instruction Manual - Page 191

Tutorial 9-3: Embroidering With the Jumbo Frame 2 Click [Next] to view the next side of the embroidery design. b To view the embroidery pattern of the separate sides, uncheck the [Show about selected Object(s)]. Step 4 Attaching stabilizer to the fabric Always use stabilizer when embroidering. For large designs split into sections, the stabilizer must be attached to the fabric, for example, by using iron-on stabilizer, self-adhesive stabilizer or spray adhesive. Use stabilizer appropriate for the fabric. In addition, be sure to use stabilizer that is strong enough and large enough for the entire embroidering area. You may need to attach two layers if thin stabilizer is used. cc See more information about stabilizer, "Step 4 Attaching stabilizer to the fabric" on page179. Step 5 Embroidering Embroider using the embroidery positioning stickers included with the embroidery machine. These stickers are detected by the embroidery machine's built-in camera to automatically position the fabric. 1 Hoop the fabric in the embroidery frame. Operations for Specific Applications ■ Saving the design The entire design is saved as a single file (.pes). cc "Transferring to a machine by using USB media" on page 201, and "Transferring directly to a machine's memory" on page 201 a An embroidery design for the jumbo frame cannot be transferred to the machine by using an original card. Transfer these designs directly to the machine's memory or to the machine by using USB media. 2 Attach the embroidery frame to the embroidery machine. 3 Select the pattern for side 1, and then start the embroidery machine to embroider the side 1 embroidering area. 190