Brother International PE-DESIGN 10 Instruction Manual - Page 171
Tutorial 8-3: Creating a Cutwork Pattern Filled with Net Stitching, Using the Cutwork Wizard
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Operations for Specific Applications Tutorial 8-3: Creating a Cutwork Pattern Filled with Net Stitching 3 Enlarge the pattern imported into the Design Page. 4 Ungroup the pattern. Select the pattern, right-click it, and then click [Ungroup]. b • The [Cutwork Wizard] can also be used if closed shape patterns or text patterns are selected. • If a line of the pattern crosses itself, the [Cutwork Wizard] will not be available. • Text with built-in font 025 or 029 or a userdefined font cannot be used. • Shape patterns and text patterns cannot be combined. 3 Specify settings in the [Cutwork Wizard] in the following order a - e. a b c d e Step 2 Using the Cutwork Wizard 1 Select the four leaves, and then click the [Home] tab. 2 Click [Cutwork Wizard] in the [Cut and Sew] group to start the [Cutwork Wizard]. a Stabilize Cut Edge b Cutting Line c Secure Water-Soluble Stabilizer d Net Fill e Covering Satin Stitch b To return all parameters to their default settings, click [Default]. 4 Specify running stitching along the edge before cutting in [Stabilize Cut Edge]. By specifying that running stitches be sewn before the fabric is cut, the cut edges are reinforced, preventing them from unraveling. For this example, select [Yes]. 170