Brother International PE-DESIGN 10 Instruction Manual - Page 202
Transferring Embroidery Designs to Machines
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Transferring Embroidery Designs to Machines Transferring Embroidery Designs to Machines The procedures for transferring the created embroidery pattern to an embroidery machine differ depending on your embroidery machine model. For details, refer to the Operation Manual provided with your embroidery machine. Transferring to a machine by using USB media Designs can be transferred to an embroidery machine compatible with the USB Host function. a The "PE-DESIGN Software Key" cannot be used as USB media. Do not save embroidery files on the "PE-DESIGN Software Key" for transferring. 4 After the data has been transferred, the message "Finished outputting data." appears, indicating that the transfer is finished. Click [OK], and then remove the USB media. b If multiple USB media are connected, specify where the data is to be transferred in the area shown below. 1 Plug the USB media into the computer. 2 Click the [Home] tab. 3 Click [Send] in the [Sew] group, click [Send to USB Media], and then select the desired drive. Transferring directly to a machine's memory Designs can be transferred to embroidery machines that can be connected to a computer using a USB cable. Data transfer begins. a If there is already a file with the same name at the destination, the following dialog box appears. Select whether to overwrite the existing file, to stop copying or to copy the file using a different name. 1 Connect the embroidery machine to the computer. 2 Click the [Home] tab. 3 Click [Send] in the [Sew] group, click [Send to Your Machine], and then select the desired drive. Data transfer begins. 201