Brother International PE-DESIGN 10 Instruction Manual - Page 332

Sewing Attributes ■ Region sewing attributes The available attributes differ depending on the selected sew type. cc "Specifying sewing attributes" on page 54 Satin Stitch To specify underlay stitching, select the check box, and then specify settings for the following attributes. Specify the type of underlay stitching to be sewn. • For text patterns or for shape patterns with multiple sewing direction lines • For shape patterns with a single sewing direction line Under sewing Edge only Single Region only (single layer of zigzag shaped stitches) Region only (single layer of piping stitches) Edge and region (single layer of zigzag shaped stitches) Region only (double layer of zigzag shaped and piping stitches) Double • For regions in Design Center Single Double [Density] Select [Dense], [Medium] or [Light] as the density for the underlay stitching. Coarse Fine [Gradation] Density This cannot be specified under the following conditions. Off On • The sewing direction is set to [Variable] • Text pattern • When a feathered edge is specified Click [Pattern] to set the gradation pattern. cc "Creating a gradation/blending" on page 47 Direction This cannot be specified for text pattern. [Manual]: Sews at a fixed angle. Drag or select a value to specify the angle. If there are multiple sewing direction lines, a value cannot be specified for the angle. [Auto]: Automatically varies the sewing direction according to the shape of the region. [Manual] [Auto] Off On Half Stitch To specify half stitching, select the check box. This cannot be specified if the sewing direction is set to [Manual] and there is only one sewing direction line. The inside stitching is dense. The stitching is adjusted to a more even density. 331