Brother International PE-DESIGN 10 Instruction Manual - Page 172
Cutting Line], Cutting], Secure Water-Soluble, Stabilizer], Net Fill], Pattern], Running Stitch
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Tutorial 8-3: Creating a Cutwork Pattern Filled with Net Stitching 5 Specify cutting line type in [Cutting Line]. Select whether the fabric will be cut along the cutting line or whether the cutting line will remain as running stitches. For this example, select [Cutting]. Cutting In order for this setting to be available cc "Basic requirements for Cutwork functions" on page 173 Select this setting to cut the fabric with a machine installed with cutwork needles. Running Stitch Select this setting to sew the cutting line, then cut along the cutting line with scissors. 7 Specify net fill stitching inside the cutout areas in [Net Fill]. By sewing net fill stitching in cutouts, inner cutouts can be reinforced while allowing for a greater design variety. For this example, select [Yes]. Select the parameters according to the procedure from step 8 to 10, when [Net Fill] is set to [Yes]. 8 Specify the net fill stitch pattern in [Pattern]. Five net fill stitch patterns are available. For this example, select [Pattern 2]. 6 Specify securing of the water-soluble stabilizer in [Secure Water-Soluble Stabilizer]. Running stitches will be sewn to secure the water-soluble stabilizer after the fabric has been cut. In order to prevent embroidery from losing its shape after it has been cut, place water-soluble stabilizer in the cutout areas and sew it in place. For this example, select [Yes]. Pattern 1 Pattern 3 Pattern 2 Pattern 4 171 Pattern 5