Brother International PE-DESIGN 10 Instruction Manual - Page 249

Transferring Embroidery Designs to Machines a • Do not remove the USB media while designs are being written. • If there is already a file with the same name at the destination, the following dialog box appears. Select whether to overwrite the existing file, to stop copying or to copy the file using a different name. b If a volume label has been specified for the USB media, " [(Drive Letter):] (Volume Label)" appears in the [Send To] selector. If a volume label has not been specified, " [(Drive Letter):] USB Media" appears. For details on changing the name (volume label) for the USB media, refer to the manual provided with the USB media. ■ Transferring directly to a machine's memory Designs can be transferred to embroidery machines that can be connected to a computer using a USB cable. 4. Select from the [Send To] selector. b If multiple embroidery machines are connected, for each machine appears. Select the machine to be used to embroider. 5 Click . 6 Select a folder in a, select an embroidery file from the contents pane b, and then click to add the file to the writing list. After all embroidery files to be written are added to the writing list, click . a b c d  The designs in the writing list are written to the embroidery machine's memory.  When the designs have been written, the message "Finished outputting data." appears. a • Do not remove the USB cable while designs are being written. • If there is already a file with the same name at the destination, a dialog box appears. Select whether to overwrite the existing file, to stop copying or to copy the file using a different name. Design Database 248