Brother International PE-DESIGN Ver.6 Users Manual - English - Page 103

PeDesignV6Eng.book Page 95 Thursday, July 8, 2004 11:59 AM Design Center Stage 4 (Sew Setting Stage) Advanced Opreation Design Center Motif stitch Selects whether to use pattern 1 or pattern 2 for the motif stitch. If you choose to use both patterns, the data is created to sew alternating rows of the two. Pattern1 only: Uses only pattern 1 (Default) Pattern2 only: Uses only pattern 2 Pattern1 and 2: Uses pattern 1 and pattern 2 Select a pattern for the motif stitch. Motif Pattern1 Pattern 2 Direction Row Offset Click , and then, in the Browse dialog box that appeared, select the folder containing the .pmf file that you want to use. Double-click the desired pattern, or select it, and then click OK. Width (horizontal length) Sets the pattern width (the direction along the line). Range: 2-10 mm (0.08-0.39 inch) Default: 5.0 mm (0.20 inch) Height (vertical length) Sets the pattern height (the direction perpendicular to the line). Range: 2-10 mm (0.08-0.39 inch) Default: 5.0 mm (0.20 inch) H-Arrange (horizontal arrangement) Sets the horizontal arrangement of the pattern. For Normal: patterns like , the patterns will be arranged along Mirror: the line as shown at the right. Alternate: V-Arrange (vertical arrangement) Sets the vertical arrangement of the pattern. For pat- Normal: terns like , the patterns will be arranged along the Mirror: line as shown at the right. Alternate: Allows you to rotate the angle of the motif stitch. Range: 0-359 degrees Default: 0 degrees 135° 90° 45° 180° 0° 225° 315° 270° Sets the amount of offset for each row. Range: 0-10 mm (0.00-0.39 inch) Default: 0.0 mm (0.00 inch) Run Pitch Sets the pitch of the sewing. Range: 1-10 mm (0.04-0.39 inch) Default: 2.0 mm (0.08 inch) Cross stitch Size Times Sets the horizontal and vertical size of the pattern. In Expert mode, the set value is converted automatically and displayed in the box for the other measurement units. Range: 1.5-5.0 mm (0.06-0.20 inch) or 5-17 counts Default: 2.5 mm (0.10 inch) or 10 counts Sets the number of times that the pattern will be sewn. Sews twice per time. Range: Single, Double, Triple Default: Single Concentric circle stitch, radial stitch and spiral stitch For details on moving the center point of the concentric circle stitch and the radial stitch, refer to "Moving the center point of the concentric circle stitch and radial stitch" on page 97. Density Run pitch Sets the number of lines per millimeter. Range: 0.5-7.0 lines per mm (13-178 lines per inch) Default: 2.0 lines per mm (51 lines per inch) Sets the pitch of the line sewing. Range: 1-10 mm (0.04-0.39 inch) Default: 2.0 mm (0.08 inch) 95