Brother International PE-DESIGN Ver.6 Users Manual - English - Page 93

PeDesignV6Eng.book Page 85 Thursday, July 8, 2004 11:59 AM Design Center Stage 4 (Sew Setting Stage) Advanced Opreation Design Center 2. Right-click a closed region. → The Sewing Attribute Setting dialog box for the selected region appears. 1. Click on the Tool Box. → The shape of the pointer changes to , and the Sewing Attributes bar appears similar to the one shown below. b Memo: • An alternate method is to select the menu command Sew - Setting Attribute, or click the Toolbar button indicated below. Sewing Attribute • The Sewing Attributes bar shows the color and sew type for the selected region. You can change the color and sew type at this time. For more details on changing the color and sew type, refer to "Color" on page 89 and "Sew type" on page 89. 3. If necessary, change the settings in the Sewing Attribute Setting dialog box. b Memo: To return to the default setting, click at the right of the setting. c "Specifying sewing attributes" on page 89 4. To apply the new attributes to the region, click each region where you want to apply the new attributes. 5. Click Close to close the dialog box. 2. If necessary, change the color and sew type. b Memo: • You can change the color and sew type either before or after applying sewing attributes to the outline. For more details on changing these settings, refer to "Color" on page 89 and "Sew type" on page 89. • You can also use the settings in the Sewing Attribute Setting dialog box to define other attributes of the sew type. (For more details, refer to "Specifying sewing attributes" on page 89.) If you do not change these settings at this time, the current settings will be applied, however you can modify them later. 3. Click the outline where you want to apply the sewing attributes. → "Marching lines" appear along the selected outline, and the color and sew type selected on the Sewing Attributes bar are applied to the outline. Line sewing ■ Applying sewing attributes to the entire outline 85