Brother International PE-DESIGN Ver.6 Users Manual - English - Page 181

Advanced Opreation Layout & Editing PeDesignV6Eng.book Page 173 Thursday, July 8, 2004 11:59 AM Layout & Editing Editing Embroidery Patterns E/V stitch Selects the E stitch or V stitch. Interval Sets the distance between stitches. Range: 1.0-20.0 mm (0.04-0.79 inch) Default: 5.0 mm (0.20 inch) E stitch V stitch Stroke width E Stitch V Stitch Run pitch Run time(s) Stroke times Arrange Sets the pattern height (the direction perpendicular to the line). Range: 1.0-10.0 mm (0.04-0.39 inch) Default: 2.5 mm (0.10 inch) E stitch Sets the pitch of the line sewing. Range: 1.0-10.0 mm (0.04-0.39 inch) Default: 2.0 mm (0.08 inch) E stitch V stitch V stitch Sets the reverse stitching for the running stitches. With the V stitch, the "V" is included in the run times. Range: 1, 3, 5 Default: 1 Sets the number of strokes of the yarn carrier. Available only if E Stitch is selected. Range: 1-3 Default: 1 Sets the inside/outside arrangement of the E stitch or V stitch. E stitch V stitch ■ Region sewing attributes The available attributes differ depending on the selected sew type. Satin stitch Under sewing Density Gradation Direction Sets underlay stitching on or off. Try to use underlay stitching for wide areas, in order to prevent shrinking during stitching. Depending on the shape of the region, however, it may not be possible to select this setting. On: Underlay stitching will be sewn. Off: Underlay stitching will not be sewn. Sets the number of lines per millimeter. Range: 1-7 lines per mm (25-178 lines per inch) Default: 4.5 lines per mm (114 lines per inch) Sets the density gradation setting on or off. Available when the type of sewing direction is set to Constant. Click Pattern to set the gradation pattern. Default: Off For details on this attribute, refer to"Creating a gradation" on page 179. [Type] Specifies the type of sewing direction. Constant: Sews at a fixed angle. The angle is specified by the angle setting. Variable: Varies the sewing direction according to the object being sewn. [Angle] Specifies the sewing angle. Available only when the sewing direction type is set to Constant. 135° 90° 45° 180° 0° Range: 0-359 degrees Default: 45 degrees 225° 315° 270° 173