Brother International PE-DESIGN Ver.6 Users Manual - English - Page 184
Pull Compensation, Programma, ble fill, Browse, Direction, Offset, column, Stitch, Base Sew, Step
View all Brother International PE-DESIGN Ver.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
PeDesignV6Eng.book Page 176 Thursday, July 8, 2004 11:59 AM Layout & Editing Editing Embroidery Patterns Pull Compensation Lengthens the sewing region in the stitch pattern's sewing direction to prevent pattern shrinkage during sewing. Range: 2-10 mm (0.08-0.39 inch) Default: 0.0 mm (0.00 inch) Select a pattern for programmable fill stitch. Programmable fill Width (horizontal length) Height (vertical length) Direction Offset Direction Value Stitch Type Click , and then, in the Browse dialog box that appeared, select the folder containing the .pas file that you want to use. Double-click the desired pattern, or select it, and then click OK. Sets the stitch pattern width. Range: 2-10 mm (0.08-0.39 inch) Default: 7.5 mm (0.30 inch) Sets the stitch pattern height. Range: 5-10 mm (0.20-0.39 inch) Default: 7.5 mm (0.30 inch) Allows you to rotate the angle of the stitch patterns. Range: 0-359 degrees Default: 0 degrees 135° 90° 45° 180° 0° 225° 315° 270° Sets the direction of the offset as row/column. row column When the pattern's arrangement is offset, sets the amount of offset. Range: 0-99% Default: 0% Specifies the shape of stitching on the edges. Available only when the Base Sew check box is selected. Available settings: , Default: (for all objects other than text) Base Sew Specifies the base stitching. (for text) Step Pitch Sets the pitch of the stitching for the base of a programmable fill stitch. Available only when the Base Sew check box is selected. Step pitch Range: 1-10 mm (0.04-0.39 inch) Default: 4.0 mm (0.16 inch) Sets the spacial frequency steps of the stitching for the base of a programmable fill stitch. Available only when the Base Sew check box is Frequency selected. 30% 0% Range: 0-99% Default: 30% Pattern The stitching for the base (area other than the pattern indicated by the diagonal lines) of the programmable fill stitch can be set. The pattern is sewn with the specified stitching. 176