Brother International PE-DESIGN Ver.6 Users Manual - English - Page 16
System requirements, STEP 1] Installing the software
View all Brother International PE-DESIGN Ver.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PeDesignV6Eng.book Page 8 Thursday, July 8, 2004 11:59 AM Before Use System requirements Before installing the software on your computer, make sure that the computer meets the following requirements. Computer Operating system Processor Memory Hard disk free space Monitor Port Printer CD-ROM drive IBM-PC or compatible computer originally equipped with a USB port Windows 98, ME, XP or 2000 Pentium 500 MHz or higher Minimum 64 MB (256 MB or more is recommended.) Minimum 100 MB SVGA (800 × 600), 16-bit color or higher USB Ver. 1.1 or higher A graphic printer that is supported by your system (if you wish to print your images) Required for installation a Note: • Power is supplied to the USB card writer module through the USB connection. Connect the USB card writer module to a USB connector on the computer or to a self-powered USB hub that can supply enough power to the card writer module. If the card writer module is not connected in this way, it may not operate correctly. • This product may not operate correctly with some computers and USB expansion cards. [STEP 1] Installing the software This section describes how to install the application software. a Note: • If the installation is interrupted or not performed as described, the software will not be installed correctly. • Before turning on the computer, be sure to DISCONNECT the USB card writer module. b Memo: The following installation procedure includes descriptions and dialog boxes for Windows XP. The procedure and dialog boxes for other operating systems may be slightly different. 1. Insert the enclosed CD-ROM into the computer's CD-ROM drive. → After a short while, the Choose Setup Language dialog box automatically appears. 8