Brother International PE-DESIGN Ver.6 Users Manual - English - Page 48

PeDesignV6Eng.book Page 40 Thursday, July 8, 2004 11:59 AM Creating and Editing Embroidery Patterns 1. In Design Center, click File on the menu bar, and then click Open. → An Open dialog box similar to the one shown below appears. An alternate method is to click the Toolbar button indicated below. from Design Center → The Import size dialog box appears. 2. Select Design Center PEM File (*.PEM) in the Files of type box, the sample file Flower.pem in the Data folder, and then click Open. b Memo: If the Preview check box is selected, the contents of the selected file will appear in the Preview box. 5. In the Magnification box, type or select 70%, and then click Import. → The embroidery pattern is imported into the Design Page of Layout & Editing. a Note: Be sure to select a .pem file saved in stage 4 (Sew Setting stage). You cannot import another file type from Design Center. → The embroidery pattern is displayed in the Design Page of Design Center. Handles b Memo: • The dotted line and the handles that appear around the embroidery pattern show that the pattern is selected. • The status bar shows the dimensions (width and height) of the selected pattern. 3. Click Option on the menu bar, and then click Layout & Editing to display the Layout & Editing window. 4. In Layout & Editing, click File on the menu bar, point to Import, and then click from Design Center on the submenu. 40 Step 2 Adjusting the size and position of the embroidery pattern When you import a pattern from Design Center, Layout & Editing puts the pattern at the center of the Design Page. We are now going to change the size of the imported pattern and move it to a different location. 1. Click on the Tool Box. → The shape of the pointer changes to .