Brother International PE-DESIGN Ver.6 Users Manual - English - Page 132

PeDesignV6Eng.book Page 124 Thursday, July 8, 2004 11:59 AM Layout & Editing Inputting Images and Embroidery Patterns ■ If Photo Stitch 2 (Mono) is selected → A Select Mask dialog box similar to the one shown below appears. → A Gray Balance dialog box similar to the one shown below appears. 4. Move the slider to specify which parts of the image to create the embroidery pattern for. a Note: If the width or height of the image exceeds 500 mm, the Photo Stitch functions cannot be used. 1. From the list at the bottom of the dialog box, select the desired shape that the image will be trimmed to (mask). b Memo: To automatically set a mask so that the background is trimmed off, click Auto Generate. 2. In the image preview box, move the handles of the mask until it surrounds the desired part of the image c For details on the settings, refer to page 117. 3. In the Select Mask dialog box, click Next. b Memo: • An embroidery pattern will be created from any areas remaining in black. • To return to the previous dialog box, click Previous. • To quit the operation and close the dialog box, click Cancel. 124