Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1008

www.dell.com | support.dell.com area nssa c e s Specify an area as a Not So Stubby Area (NSSA). Syntax area area-id nssa [default-information-originate] [no-redistribution] [no-summary] To delete an NSSA, enter no area area-id nssa. Parameters area-id no-redistribution default-information-or iginate no-summary Specify the OSPF area in dotted decimal format (A.B.C.D) or enter a number from 0 and 65535. (OPTIONAL) Specify that the redistribute command should not distribute routes into the NSSA. You should only use this command in a NSSA Area Border Router (ABR). (OPTIONAL) Allows external routing information to be imported into the NSSA by using Type 7 default. (OPTIONAL) Specify that no summary LSAs should be sent into the NSSA. Defaults Command Mode Not configured ROUTER OSPF Command History Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series area range c e s Summarize routes matching an address/mask at an area border router (ABR). Syntax area area-id range ip-address mask [not-advertise] To disable route summarization, use the no area area-id range ip-address mask command. Parameters area-id ip-address mask not-advertise Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535. Specify an IP address in dotted decimal format. Specify a mask for the destination prefix. Enter the full mask (for example, 255.255.255.0). (OPTIONAL) Enter the keyword not-advertise to set the status to DoNotAdvertise (that is, the Type 3 summary-LSA is suppressed and the component networks remain hidden from other areas.) Defaults No range is configured. Command Modes ROUTER OSPF Command History Version 7.8.1.0 Version 7.6.1.0 Introduced support for Multi-Process OSPF. Introduced on S-Series 1008 | Open Shortest Path First (OSPFv2 and OSPFv3)