Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1408

www.dell.com | support.dell.com Example Figure 56-6. stack-unit renumber Command Example S50V_7.7#stack-unit 0 renumber 2 Renumbering master unit will reload the stack. Proceed to renumber [confirm yes/ no]: Related Commands reload reset stack-unit show system (S-Series) Reboot FTOS. Reset the designated S-Series stack member. Display the current status of all stack members or a specific member. upgrade system stack-unit (S-Series stack member) s Copy the boot image or FTOS from the management unit to one or more stack members. Syntax upgrade {boot | system} stack-unit {all | 0-7} Parameters boot system all 0-7 Enter this keyword to copy the boot image from the management unit to the designated stack members. Enter this keyword to copy the FTOS image from the management unit to the designated stack members. Enter this keyword to copy the designated image to all stack members. Enter the unit ID of the stack member to which to copy the designated image. Defaults No configuration or default values Command Modes EXEC Command History Usage Information Related Commands Version 7.7.1.0 Introduced on S-Series You must reload FTOS after using the upgrade command. reload reset stack-unit show system (S-Series) show version upgrade (S-Series management unit) Reboot FTOS. Reset the designated S-Series stack member. Display the current status of all stack members or a specific member. Display the current FTOS version information on the system. Upgrade the bootflash image or system image of the S-Series management unit. 1408 | S-Series Stacking Commands