Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 372

www.dell.com | support.dell.com Parameters ipv4 unicast community-list-name exact-match (OPTIONAL) Enter the ipv4 unicast keywords to view information only related to ipv4 unicast routes. Enter the name of a configured IP community list. (max 16 chars) Enter the keyword for an exact match of the communities. Command Modes EXEC EXEC Privilege Example Figure 12-10. Command Example: show ip bgp community-list #show ip bgp community-list pass BGP table version is 0, local router ID is 10.101.15.13 Status codes: s suppressed, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network Origin codes: i - IGP, e - EGP, ? - incomplete Network # Next Hop Metric LocPrf Weight Path The show ip bgp community-list command without any parameters lists BGP routes matching the Community List and the output is the same as for the show ip bgp command output. Table 12-4. show ip bgp community-list Command Example Fields Field Network Next Hop Metric LocPrf Weight Path Description Displays the destination network prefix of each BGP route. Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight Lists all the ASs the route passed through to reach the destination network. Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced support on C-Series show ip bgp dampened-paths c e s View BGP routes that are dampened (non-active). Syntax show ip bgp [ipv4 unicast] dampened-paths Command Modes EXEC EXEC Privilege 372 | Border Gateway Protocol IPv4 (BGPv4)