Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1125

Defaults No default values or behavior Command Modes CONFIGURATION Command History Version 7.4.1.0 Introduced Usage The RP addresses are stored in the order in which they are entered. RP addresses learnt via BSR take Information priority over static RP addresses. Without the override option, RPs advertised by the BSR updates take precedence over the statically configured RPs. ipv6 pim rp-candidate e Specify an interface as an RP candidate. Syntax ipv6 pim rp-candidate interface [priority-value] Parameters interface priority-value Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a Port Channel interface, enter the keyword port-channel followed by a number: E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter a number as the priority of this RP Candidate, which is included in the Candidate-RP-Advertisements. Range: 0 (highest) to 255 (lowest) Defaults No default values or behavior Command Modes CONFIGURATION Command History Version 7.4.1.0 Introduced PIM-Sparse Mode (PIM-SM) | 1125