Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1571
show hardware rpm rp1/rp2, show interfaces link-status
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1571 highlights
show hardware rpm rp1/rp2 e Display advanced debugging information for the RPM processors. Syntax show hardware rpm slot-number {rp1 | rp2} {data-plane | party-bus} {counters | statistics} Parameters slot-number rp1 | rp2 data-plane party-bus counters statistics Enter the RPM slot number 0 or 1. Enter either the keyword rp1 or rp2 to designate which route processor debug information to display. (OPTIONAL) Enter the keywords data-plane to display control processor information on the dataplane of the specified RPM. (OPTIONAL) Enter the keywords party-bus to display control processor information on the party-bus of the specified RPM. (OPTIONAL) Enter the keyword counters to display the standard Ethernet counters. (OPTIONAL) Enter the keyword statistics to display driver-related counters Defaults No default values or behavior Command Modes EXEC EXEC Privilege Usage Information If the "dropped cell" field is non-zero, look for a pattern such as burstiness when the counters increment. It is normal to see a small number of continuous cell drops. Burstiness may indicate congestion on the internal switch at a particular point in time. Command History Version 6.5.4.0 Introduced show interfaces link-status e Displays 10-Gigabit Ethernet link fault signaling and port status information. Syntax show interfaces tenGigabitEthernet slot/port link-status Parameters tenGigabitEthernet Enter the keyword tenGigabitEthernet followed by the slot/port information. Command Modes Command History EXEC EXEC Privilege Version 6.5.4.0 Introduced E-Series Debugging and Diagnostics | 1571