Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 840

www.dell.com | support.dell.com Command Modes Usage Information INTERFACE Dell Force10 recommends configuring metrics on all interfaces. Without configuring this command, the IS-IS metrics are similar to hop-count metrics. isis network point-to-point e Enable the software to treat a broadcast interface as a point-to-point interface. Syntax isis network point-to-point To disable the feature, enter no isis network point-to-point. Defaults Not enabled. Command Modes INTERFACE isis password e Configure an authentication password for an interface. Syntax isis password [hmac-md5] password [level-1 | level-2] To delete a password, enter the no isis password [password] [level-1 | level-2] command. Parameters encryption-type hmac-md5 password level-1 level-2 (OPTIONAL) Enter 7 to encrypt the password using DES. (OPTIONAL) Enter the keyword hmac-md5 to encrypt the password using MD5. Assign the interface authentication password. (OPTIONAL) Independently configures the authentication password for Level 1. The router acts as a station router for Level 1 routing. This is the default. (OPTIONAL) Independently configures the authentication password for Level 2. The router acts as an area router for Level 2 routing. Defaults No default password. level-1 (if not otherwise specified) Command Modes INTERFACE Usage To protect your network from unauthorized access, use this command to prevent unauthorized routers Information from forming adjacencies. You can assign different passwords for different routing levels by using the level-1 and level-2 keywords. The no form of this command disables the password for Level 1 or Level 2 routing, using the respective keywords level-1 or level-2. This password provides limited security as it is processed as plain text. 840 | Intermediate System to Intermediate System (IS-IS)