Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 517

smtp server-address c e Identify the local SMTP (Simple Mail Transfer Protocol) server from which FTSA email messages will be forwarded. Syntax smtp server-address server-address [smtp-port port number] To remove the SMTP address, use the no smtp server-address command. This action will disable email messaging until you enter a new SMTP server address. Parameters server-address server address smtp-port port number Enter the keyword server-address followed by the SMTP server address, such as smtp.yourco.com. The domain name you specify can be resolved into an IPv4 or IPv6 address. Optionally, enter the keyword smtp-port followed by the SMTP port number. Range: 0 to 65535 Default: 25 Defaults Command Mode Command History SMTP port = 25 CONFIGURATION (conf-callhome) Version 7.6.1.0 Version 6.3.1.0 Introduced on C-Series Introduced for E-Series Usage Information The switch only plays the part of an SMTP client to send email messages to the SMTP server designated here. This SMTP server is required in order to receive the email messages and forward them to local and remote designated recipients. The default port number on an SMTP server is 25. If a host name is given (instead of an IP address), DNS should be enabled to resolve the host name. Related Commands admin-email enable enable-all Specify the Administrator's email address. Enable FTSA email messages for the selected recipient. Enable FTSA email messages for all designated recipients. FTOS Service Agent | 517