Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 97

pattern pattern sweep-min-size sweep-max-size sweep-interval ointerface (IPv4 only) Enter the IPv4 data pattern. Range: 0-FFFF Default: 0xABCD Enter the minimum size of datagram in sweep range. Range: 52-15359 bytes Enter the maximum size of datagram in sweep range. Range: 53-15359 bytes Enter the incremental value for sweep size. 1-15308 seconds (IPv4 only) Enter the outgoing interface for multicast packets. • Enter the IP address in A.B.C.D format • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel, enter the keyword port-channel followed by a number: C-Series and S-Series: 1-128 E-Series: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale • E-Series only For the SONET interfaces, enter the keyword sonet followed by slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Defaults See parameters above. Command Modes EXEC EXEC Privilege Command History Version 8.4.1.0 Version 8.3.1.0 Version 8.2.1.0 Version 8.1.1.0 Version 7.9.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 IPv6 pinging available on management interface. Introduced extended ping options. Introduced on E-Series ExaScale (IPv6) Introduced on E-Series ExaScale (IPv4) Introduced VRF Introduced on S-Series Introduced support for C-Series Added support for IPv6 address on E-Series Control and Monitoring | 97