Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 458

www.dell.com | support.dell.com clear ip dhcp c s Reset DHCP counters. Syntax clear ip dhcp [binding {address} | conflict | server statistics] Parameters binding address conflicts server statistics Enter this keyword to delete all entries in the binding table. Enter the IP address to clear the binding entry for a single IP address. Enter this keyword to delete all of the log entries created for IP address conflicts. Enter this keyword to clear all the server counter information. Command Mode EXEC Privilege Default None Command History Usage Information Version 8.2.1.0 Introduced on C-Series and S-Series. Entering after clear ip dhcp binding, clears all the IPs from the binding table. client-identifier c s Identify the Microsoft clients using a special identifier rather than the hardware address. Syntax client-identifier unique-identifier Parameters unique-identifier Enter the client identifier for a Microsoft. Command Mode DHCP Default None Command History Usage Information Version 8.2.1.0 Introduced on C-Series and S-Series. Microsoft clients require a client identifier instead of a hardware addresses. The client identifier is formed by concatenating the media type and the MAC address of the client. Refer to the "Address Resolution Protocol Parameters" section of RFC 1700-Assigned Numbers, for a list of media type codes. debug ip dhcp server c s Display FTOS debugging messages for DHCP. Syntax debug ip dhcp server [events | packets] 458 | Dynamic Host Configuration Protocol (DHCP)